Type 1+2 PV surge protector - 1500 Vdc

DS50PVS-1500/12KT1
Part Number: 482573
DS50PVS-1500/12KT1
  • Type 1+2 surge protector for Photovoltaic
  • Impulse currents Iimp/Itotal : 6.25/12.5 kA (10/350µs)
  • Common/Differential mode protection
  • Remote signaling
  • IEC 61643-31, EN 61643-31 and EN 50539-11 certified
  • UL1449 ed.5 compliance
Contact Us
Type 1 + 2 surge protection (SPD) DS50PV/12KT1 are intended for the protection of photovoltaic power grids. The SPD cartridges are pluggable to ensure quick replacement in the event of a defect. The protection circuit consists of a fault-resistant Y-circuit with a gas discharge tube and high-power varistors. The products are available with a remote signaling system of the state of the surge protectior.
SPD type
1+2
Network
 PV network 1250 Vdc
Nominal PV voltage
 Uocstc 1250 Vdc
Max. PV operating voltage
 Ucpv 1500 Vdc
Residual Current
Leakage current to Ground
 Ipe < 0.3 mA
PV Permanent Operating current
Current consumption at Ucpv
 Icpv < 0.1 mA
Follow current
If None
Nominal discharge current
15 x 8/20 µs impulses
 In 15 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
 Imax 40 kA
Total Maximum discharge current
max. total withstand @ 8/20 µs
Imax Total 60 kA
Impulse current by pole
max. withstand 10/350µs by pole
 Iimp 6.25 kA
Total lightning current
max. total withstand @ 10/350µs
 Itotal 12.5 kA
Current withstand short circuit PV
 Iscpv 15 000 A
Connection mode(s)
 +/-/PE
Protection mode(s)
 Common/Differential mode
Protection level +/PE (-/PE)
@ In (8/20µs)
 Up 5.3 kV
Technology
 MOV
Connection to Network
 By screw terminals: 2.5-25mm²
Format
 Plug-in modular box
Plugable
 Yes
Mounting
 Symmetrical rail 35 mm (EN 60715)
Housing material
 Thermoplastic UL94 V-0
Operating temperature
 Tu -40/+85°C
Protection rating
 IP20
Outdoor application
 No
Disconnection indicator
 3 mechanical indicators
Spare module(s)
 DSM50PV-1500/12KT1
Remote signaling of disconnection
 Output on changeover contact
Dimensions
 See diagram
Weight
 0.477 kg
Standards compliance
 IEC 61643-31 / EN 61643-31 / EN 50539-11 / UL1449 ed.5
Certification
 EAC / TUV
Thermal disconnector
 Internal
Fuses
 Without