Coordination inductor

DSH2x16
Part Number 2690
DSH2x16
  • Coordination inductors for surge protectors
  • For use with the DS series
  • 2 x 16 A

These coordination inductors are specially designed to control the implementation of the primary and secondary levels of SPD surge protectors. They are necessary where the coordination cannot be accomplished using the 'natural' inductance of the active conductors (in particular in a small volume, where the length of line wire between primary SPD and secondary SPD is lower than 10m), DSH inductors are DIN rail compatible and are connected in series on the line to be protected and depend on the maximum line current.

Select another reference:

Max. AC operating voltage
Uc 500 Vac
Max. load current
@25°C
IL 2 x 16 A
Connection to Network
By screw terminals: 6-35mm²
Format
1-pole modular box
Mounting
Symmetrical rail 35 mm (EN 60715)
Housing material
Thermoplastic UL94 V-0
Operating temperature
Tu -40/+85°C
Protection rating
IP20
Outdoor application
No
Wiring mode
1 DSH in series on 2 active wires
Dimensions
See diagram