19'' patch panel surge protector - POE-B line

PCH12-POE-B
Part Number 6276
PCH12-POE-B
  • 19'' patch panel surge protector for POE-B
  • 12 ports
  • In : connector type 110 back
  • Out : RJ45 front
  • Maintenance possible per port
  • Secondary protection
  • UL497B

The PCH series protects 12, 24 and 48 ports, 19''rack mounted protection units that feature 110 punchdow to RJ45 connectors. This series feature CAT6 perfomance for todays's high speed data networks. These products are also available in configurations that offer surge protection to Telco and ISDN circuits.


Network
POE mode B, Gigabit Ethernet, POE Plus
Nominal line voltage
Un 5 Vdc/48 Vdc
Max. DC operating voltage
Uc Pin 1.2.3.6 : 7.5 Vdc - Pin 4.5.7.8 : 60 Vdc
Max. frequency
f max. 250 MHz
Max. data rate
10/100/1000 Mbps
Insertion loss
< 1 dB
Max. load current
@25°C
IL 750 mA
Protection level
Following the test category C3 (IEC61643-21) - Line/Line
Up 20 V/ 80 V
Max. capacitance
C < 8 pF (lignes ethernet)
Discharge current
at 10/1000µs impulse current
130 A / 50 A
Line/Line Nominal discharge current
C2 Category
In L/L 600 A/250 A
Nominal Discharge Current, X-C (Line/Earth)
8/20µs Test x 10 - C2 Category
In L/PE 600 A/250 A
Technology
Diode écrêtage
SPD configuration
12 ports de 8 wires
Connection to Network
Self-stripping connector 110 back/RJ45 Female. front
Format
Rack 19''
Mounting
Baie 19''
Housing material
Aluminium
Operating temperature
Tu -40/+85°C
Protection rating
IP20
Outdoor application
No
Failsafe mode
Short-circuit
Disconnection indicator
Transmission interrupt
Spare module(s)
removable circuit 2 ports
Remote signaling of disconnection
No
Pinout
(1-2)(3-6)(4-5)(7-8)
Dimensions
See diagram
Standards compliance
IEC 61643-21 / EN 61643-21 / UL497B / IEEE 802-3at