RJ45 surge protector for CAT6A cabling network

MJ8-C6A
Part Number 581540
MJ8-C6A
  • up to 10-Gigabit Ethernet compatible
  • Category 6A compatible
  • RJ45 Shielded connectors
  • Mounted on frame or DIN rail
  • Compliance IEC 61643-21, EN 61643-21
  • Certified UL497B

The MJ8-C6A surge protector is designed to protect data processing equipment, connected to twisted pair Ethernet 10 to 1000 Mbit/s network Featured with in/out RJ45 connectors.

Select another reference:

Network
10Gigabit Ethernet - Cat 6A cabling specification
Nominal line voltage
Un 5 Vdc
Max. DC operating voltage
Uc 8 Vdc
Max. frequency
f max. 500 MHz
Max. data rate
10 Gbps
Insertion loss
< 1 dB
Protection level
Following the test category C3 (IEC61643-21) - Line/Line
Up 20 V
Impulse current
2 x 10/350µs Test - D1 Category
Iimp 500 A
Line/Line Nominal discharge current
C2 Category
In L/L 500 A
Nominal Discharge Current, X-C (Line/Earth)
8/20µs Test x 10 - C2 Category
In L/PE 2000 A
Technology
GDT+Clamping diode
SPD configuration
4 pairs+shielded
Connection to Network
RJ45 shielded connectors Female input/output
Format
Connector RJ45
Mounting
Mounting flange,Screw lug, DIN Rail
Accessory(s) provided
DIN rail adapter, screw, screw nut, earthing plate, countersunk screw, cable shoe
Housing material
Aluminium
Operating temperature
Tu -40/+85°C
Protection rating
IP20
Failsafe mode
Short-circuit
Disconnection indicator
Transmission interrupt - default mode 2
Pinout
(1-2)(3-6)(4-5)(7-8)
Dimensions
See diagram
Weight
0.106 kg
Standards compliance
IEC 61643-21/ EN 61643-21 / UL497B IEEE 802-3af/3at/3bt/ ANSI/TIA-568-C.1
Certification
UL 497B