Coaxial surge protector for video transmission networks

CNP06 F/FF
Part Number: 632602
  • Coaxial surge protector
  • Multiples connectors
  • Low insertion loss
  • Easy installation

CNP surge protectors are designed to protect sensitive equipment, connected to coaxial lines as computer networks, video-transmission, against transient surge voltages and disturbances created by lightning.

Select another reference:

Network
coaxial DC-100 MHz
Nominal line voltage
Un 5 V
Max. DC operating voltage
Uc 10 Vdc
Max. frequency
f max. DC-100 MHz
Insertion loss
≤ 0.5 dB
Return loss
≥20 dB
Impedance
50/75 ohms
VSWR
< 1.3:1
Max. load current
IL 0.5 A
Operating current
Continious current at Uc
Ic None
Max. discharge current
max. withstand @ 8/20 µs by pole
Imax 20 kA
Protection mode(s)
Common mode/Differential mode
Protection level
Following the test category C3 (IEC61643-21) - Line/Line
Up 20 V
Protection level L/N
@ In (8/20µs)
Up L/N 20 V
Protection level L/PE
@ In (8/20µs)
Up L/PE 20 V
Impulse current
2 x 10/350µs Test - D1 Category
Iimp 2.5 kA
Nominal discharge current
C2 Category
In 5 kA
Max Power
4 W
DC Pass
No
Technology
GDT+Clamping diode
Connection to Network
Connector F Female/Female
Format
Insulating box
Mounting
On plate
Housing material
Metal+plastic
Operating temperature
Tu -40/+85°C
Protection rating
IP20
Outdoor application
No
Failsafe mode
Short-circuit - transmision cut-off - fault mode 2
Disconnection indicator
Transmission interrupt
Dimensions
See diagram
Standards compliance
IEC 61643-21 / EN 61643-21 / UL497C / UL497E