Intrinsically safe dataline Surge Protector for hazardous area mounting.
Part Number: 86220612119
TSP-S2-48-M-EX/C
• Intrinsically safe and flameproof follow GB standards • Max discharge current Imax: 20kA • EX certification (CCC) approved • Complies with IEC 61643-21, GB/T 18802.21, GB/T 3836.1, GB/T 3836.4
The TSP range (Type2 or Type2+3) is designed to protect the instruments and
apparatus in hazardous area, this surge protector have very low interference for
signal transmission, while Citel high duty discharge tube are capable of withstand
Imax=20kA impulses.
Series connection can be installed by adapting interface on both sides(M&F).
The whole unit is encased in a 316 stainless steel housing for flameproof
function, threaded for the common interface used on process transmitters, the
transmitter manufacturers can installed directly without involving any additional
wiring, conduit modifications. Six prismatic shape of the housing designed for
convenient installation even in narrow space.
Certificates
Datasheet
SIL-TSP-EXC-EN.PDF
|
SPD type
|
IEC | 2+3 |
|
Network
|
RS232, RS485, 4-20mA |
|
|
Nominal line voltage
|
Un | 24 Vdc |
|
Max. DC operating voltage
|
Uc | 48 Vdc |
|
Max. frequency
|
f max. | 2 MHz |
|
Insertion loss
|
< 0,5 dB |
|
|
Max. load current @25°C
|
IL | 500 mA |
|
Nominal discharge current
15 x 8/20 µs impulses
|
In | 10 kA（L-PE） |
|
Max. discharge current
max. withstand @ 8/20 µs by pole
|
Imax | 20 kA |
|
Impulse current by pole
max. withstand 10/350µs by pole
|
Iimp | 5 kA（L-PE） |
|
Line inductance (± 10 %)
|
non |
|
|
Protection mode(s)
|
Common/Differential mode |
|
|
Protection Level
C3 (10/1000μs), 300 applications@10 A, Y-Y (Line/Line)
|
Up | 150 V |
|
Protection Level
C3 (10/1000μs), 300 applications@10 A, Y-C (Line/Earth)
|
Up | 600 V |
|
Line/Line Nominal discharge current
C2 Category
|
In L/L | 10 kA |
|
IP degree
|
IP67 |
|
|
Technology
|
GDT+TVS diode |
|
|
SPD configuration
|
2 wires |
|
|
Connection to Network
|
Built-in AWG 16# wires（L is 22mm,PE is 19.5mm） |
|
|
Format
|
Mounting with threaded interface |
|
|
Mounting
|
M20 thread connection |
|
|
Housing material
|
316 stainless steel |
|
|
Operating temperature
|
Tu | -40/+85°C |
|
Dimensions
|
See diagram |
|
Standards compliance
|
IEC 61643-21, GB/T 18802.21, GB/T 3836.1, GB/T 3836.4 |
|
|
Certification
|
CCC |
