Surge protector for Video survey

MSP-VM24/R
Part Number: 420412
MSP-VM24/R
  • Security camera surge protector
  • AC + Cat.5 (connector RJ45)
  • Compact aluminium housing
  • Rail DIN mounting or plate

MSP-VMxx-R surge protectors were designed to protect video surveillance systems against transient overvoltages generated by lightning or industrial environment. These devices protect, in a single compact housing, all the lines connected to the system: power supply (230Vac, 24Vdc, 12Vdc or 120 Vac), dataline (6 or 8 Vdc). This compact configuration allows a fast installation in a small footprint.


SPD type
2+3
Network
24 Vac/Vdc
Network
4 pairs Ethernet 100 Base-TX
Nominal line voltage
Un 24 Vac/Vdc
Max. DC operating voltage
Uc 30 Vac/Vdc
Max. DC operating voltage
Uc 8 Vdc
Max. frequency
f max. 125 MHz
Insertion loss
< 1 dB
Insertion loss
< 1dB
Max. load current
IL 5 A
Max. load current
IL 300 mA
Operating current
Continious current at Uc
Ic None
Nominal discharge current
15 x 8/20 µs impulses
In 5 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
Imax 5 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
Imax 10 kA
Withstand on Combination waveform IEC 61643-11
Class III test: 1.2/50µs - 8/20µs
Uoc 10 kV / 5 kA
Protection mode(s)
Common/Differential mode
Protection level
@ In (8/20µs)
Up 20 V
Protection level
@ In (8/20µs)
Up 20 V
Protection level
Following the test category C3 (IEC61643-21) - Line/Line
Up 220 V
Protection level L/N
@ In (8/20µs)
Up L/N 20 V
Protection level L/N
@ In (8/20µs)
Up L/N 20 V
Protection level L/PE
@ In (8/20µs)
Up L/PE 20 V
Protection level L/PE
@ In (8/20µs)
Up L/PE 20 V
Nominal discharge current
C2 Category
In 2.5 kA
Nominal discharge current
C2 Category
In 2.5 kA
Network type
POE Network
Technology
MOV+GDT
Connection to Network
By screw terminals: 2.5mm² max.
Format
DIN rail or flange
Mounting
DIN rail or plate (flange)
Housing material
Anodized aluminum
Operating temperature
Tu -40/+85°C
Protection rating
IP20
Failsafe mode
Disconnection and Power cut off
Disconnection indicator
Green LED OFF and line cut off
Voltage/operating indicator
Green Led ON
Dimensions
See diagram
Standards compliance
IEC 61643-11 / EN 61643-11 / UL1449 ed.5
Thermal disconnector
Internal