Surge protector for Video survey

MSP-VM48/RINJ
Part Number: 420455
MSP-VM48/RINJ
  • Security camera surge protector
  • Combined POE Mid-Span Injector or Splitter and SPD
  • Supports 802.3af, 802.3at, 802.3bt (POE++)
  • Compact aluminum housing
  • Rail DIN mounting or plate
  • Integrated power supply injector connector (power supply separate)

MSP-VMxx-R surge protectors were designed to protect video surveillance systems against transient overvoltages generated by lightning or industrial environment. These devices protect, in a single compact housing, all the lines connected to the system: power supply (230Vac, 24Vdc, 12Vdc or 120 Vac), dataline (6 or 8 Vdc). This compact configuration allows a fast installation in a small footprint.


Network
24 Vac/Vdc
Power nominal voltage
Un 48 Vdc
Max. power operating voltage
Uc 60 Vdc
Max. Data operating voltage
Uc 8 Vdc
Max. load current
IL 5 A
Residual Current
Leakage current to Ground
Ipe < 0.1 mA
Operating current
Continious current at Uc
Ic None
Follow current
If None
Power circuit nominal discharge current
15 x 8/20 µs impulses
In 5 kA
Data circuit nominal discharge current
15 x 8/20 µs impulses
In 2.5 kA
Power circuit max. discharge current
max. withstand @ 8/20 µs by pole
Imax 10 kA
Data circuit max. discharge current
max. withstand @ 8/20 µs by pole
Imax 5 kA
Protection level
@ In (8/20µs)
Up 0.40 kV
Protection level
Following the test category C3 (IEC61643-21) - Line/Line
Up 20 V
Network type
Mid-Span POE + Power
SPD configuration
4 pairs
Connection to Network
By screw terminals: 2.5mm² max.
Format
DIN rail or flange
Mounting
DIN rail or plate (flange)
Housing material
Anodized aluminum
Operating temperature
Tu -40/+85°C
Protection rating
IP20
Outdoor application
No
Voltage/operating indicator
Green Led ON
Remote signaling of disconnection
Output on changeover contact
Thermal disconnector
Internal
Fuses
Fuses type gG - 20A